Testing Chambers and Equipments for Dustproof and Waterproof: The Ultimate Solution for Accurate Results

IP protection rating is a standard used to measure the ability of electronic devices or test chambers to protect against solid particles and prevent liquid ingress. For the performance evaluation of dustproof and waterproof test chambers, IP protection testing methods are important tools. This article will introduce how to use IP protection testing methods to evaluate the performance of dustproof and waterproof test chambers.

LISUN JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products, LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.

waterproof test Equipment JL-X

First, it is crucial to understand the IP protection rating. The IP rating consists of two numbers, the first number represents the protection level against solid particles, and the second number represents the protection level against liquid ingress. The higher the number, the stronger the protection capability. For example, IP65 indicates that the device has complete protection against dust and high protection against liquid ingress.

Next, select the appropriate testing methods. Based on the definition of the IP protection rating, we can choose the corresponding testing methods to evaluate the performance of dustproof and waterproof test chambers. For the protection capability against solid particles, the dust protection test can be used. This testing method evaluates the protection capabilityagainst solid particles by placing particles of different sizes in the test chamber and observing if they can enter the internal of the chamber. For the protection capability against liquid ingress, the water ingress test can be used. This testing method evaluates the protection capability against liquid ingress by spraying water onto the test chamber under different water pressures and observing if there is any water ingress into the internal of the chamber.

Before conducting the testing, ensure that the test chamber is in normal working condition. Check if the seals are intact and capable of effectively sealing the internal of the chamber. Also, ensure that there are no debris or dirt inside the chamber that may affect the testing results.

Before starting the IP protection testing, it is important to create a detailed testing plan and procedure. First, determine the desired IP rating to be tested and ensure that the testing equipment and instruments adhere to the relevant standards and specifications. Then, based on the rating requirements, select the appropriate testing methods and parameters, including the dust level and water pressure. Determine the testing samples and sample quantities, and assign the testing and observation tasks. Finally, record the testing time, results, and any other relevant information for further analysis and comparison.

Start with the dust protection test. First, select solid particles of different sizes and shapes according to the chosendust level. Distribute these particles evenly on the external and internal surfaces of the test chamber, then close the chamber and initiate the test. A timer can be used to record the duration of the test. After the test, open the chamber and inspect if any dust has entered the interior. A microscope can be used to observe the interior of the chamber. Based on the observation and actual test results, determine the protection capability of the test chamber.

Next, conduct the water ingress test. Determine the required water pressure based on the chosen liquid ingress level. Using a suitable water spraying device, spray water onto the test chamber under different water pressures. Depending on the testing requirements, observe the interior of the chamber at different time points during the test. After the test, open the chamber and check if any water has entered the interior. Humidity meters and other tools can be used to detect water ingress and accumulation. Based on the actual test results and observations, determine the protection capability of the test chamber.

After the testing is completed, analyze and compare the test results. Evaluate if the protection capability of the test chamber meets the requirements based on the test results and actual specifications. If the protection capability is not satisfactory, appropriate improvement measures and adjustments need to be taken.

It is important tonote that IP protection testing methods are just one way to evaluate the performance of a test chamber and the results may be influenced by various factors. In addition to the IP protection rating, other factors such as material quality and sealing performance should also be considered. Therefore, when conducting IP protection testing, it is necessary to comprehensively evaluate the performance of the test chamber in conjunction with other factors and practical application scenarios.

In conclusion, using IP protection testing methods to evaluate the performance of dustproof and waterproof test chambers is an effective approach. By analyzing and comparing the test results, the protection capability of the test chamber can be evaluated and appropriate improvement measures can be taken. However, it should be noted that IP protection testing is just one evaluation method, and other factors need to be considered for a comprehensive assessment of the test chamber’s performance. Prior to testing, understand the definition and requirements of the IP protection rating and create a detailed testing plan and procedure. Also, ensure that the test chamber is in normal working condition, check the seals, and clean the interior of the chamber. Select appropriate dust and water ingress testing methods based on the chosen IP rating, conduct the tests, and record the results. Finally, analyze and compare the test results, and make improvements and adjustments as needed.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997