IEC 60245-1 Clause 5.6.3.2 | IEC 60227-2 Clause 3.2 Figure 2 Static Flexibility Test Machine for Flexible Cables

The WDT-3 Static Flexibility Test Machine for Flexible Cables fully meet fully meet IEC 60245-1 Clause 5.6.3.2 (GB/T 5013.1 Clause 5.6.3.2), IEC 60245-2 Clause 3.2 Figure 2 (GB/T 5013.2 Clause 3.2 Figure 2), IEC 60227-1 Clause 5.6.3.2 (GB/T 5023.1 Clause 5.6.3.2), IEC 60227-2 Clause 3.2 Figure 2 (GB/T 5023.2 Clause 3.2 Figure 2). It used for the Static Flexibility Test of Flexible Cables in the mechanical strength test (Note: This test is not suitable for cables with more than two concentric layers with a conductor nominal cross-section of more than 18 cores).

Test principle: The 3m long sample is initially 200mm at the clamping end, and then one end is moved to bend the Flexible Cable into a standard U shape, and the distance between the two clamping ends is measured.

Specification:
• Flexural length: 200 -1500(mm)
• Sample outer diameter: φ6 – 32(mm)
• Sample length: 3000±5% (mm)
• Height above ground: 1500mm
• Overall dimensions (length*width*height): 2000*400*1800mm

IEC 60245-1: 2007 Clause 5.6.3.2

IEC 60245-2: 1998 Clause 3.2 Figure 2