IEC 60598-1:2020 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this document cover: classification, marking, mechanical construction, electrical construction and photobiological safety. This ninth edition cancels and replaces the eighth edition published in 2014 and Amendment 1:2017. This edition constitutes a technical revision.
LISUN supplies the fully test solutions for the following IEC 60598-1:2020, please see the below excel table:
IEC 60598-1:2020 Clause and Subject | LISUN Model |
Clause 4.4.4 Lampholders | GNG-G5H/GNG-G13H |
Clause 4.12.4 Screwed and other fixed connections | CH338 |
Clause 4.12.5 Screwed glands shall comply with the following test. | LWMF-1 |
Clause 4.13.1 Mechanical strength | IK01-06 |
Clause 4.13.3/4 Test finger | SMT-529T |
Clause 4.13.6 (Figure 25)Rotating Barrel Drop Test Machine | LS-DDT1-B |
Clause 4.14.2 Mechanical fixings | LS-WJ62 |
Clause 4.14.3 Adjusting devices testing | DJTJ-1 |
Clause 4.18 Resistance to corrosion | YWX/Q-010 |
Clause 4.20 Rough service luminaires – Vibration requirements | LVD-100KG-6D |
Clause 4.24 Photobiological hazards | EN62471-C |
Clause 4.26.3 Lamp test chain | DJSYL-1 |
Clause 8.2 Protection against electric shock | SMT-529T |
Clause 9.2.1 (Figure 6) Dust proof luminaire tests | SC-015 |
Clause 9.2.3-9.2.9 Drip-proof luminaires | JL-X |
Clause 10.2.1 Test – Insulation resistance | WB2681A |
Clause 10.2.2 Test – Electric strength | WB2673C |
Clause 10.3 Touch current, protective conductor current and electric burn(Figure G2/G3/G4) | MNTC-G2/G3 & MNTC-G4 |
Clause 11 Creepage Distances and Clearance | CK-1 |
Clause 12.3 Endurance test | GDJS-010A |
Clause 12.4 Thermal test (normal operation) | TMP-LM |
Clause 13.2 Resistance to heat(Figure 10) | ZBP-T & GW-225 |
Clause 13.3.1 Resistance to flame test | ZY-3 |
Clause 13.3.2 Resistance to ignition testing | ZRS-3H |
Clause 13.4 Resistance to tracking(Figure 11) | TTC-1 |
Your email address will not be published. Required fields are marked *