IEC 61386-21: 2021 Clause 10.4.101&10.4.103 and Figure 103 Bending Apparatus for Metallic and Composite Conduits

LS-B51M is suitable for bending tests of metal and composite conduits. The bending angle is 90°. After the test, observe whether the sample has cracks. It complies with the requirements of IEC 61386-21: 2021 Clause 10.4.101&10.4.103 and Figure 103 (GB 20041.21 Clause 10.4 and Figure 101 ), GB/T14823.2, JG/T3050 and ZBG33008.

Specifications:
•  Nominal diameter of sample sleeve: 16, 20, 25mm
•  Horizontal radius of mold wheel: 48, 60, 75mm
•  Bending wheel track radius: 84, 105, 131.25mm
•  Radius of mold wheel and bending wheel groove: 8.1, 10.1, 12.6mm
•  Diameter of bending wheel groove: 24, 30, 37.5mm
•  Sample bending angle: 180°
•  Overall dimensions: 300x300x600mm
•  Weight: about 25kg

IEC 61386-21: 2021 Clause 10.4.101&10.4.103

IEC 61386-21:2021 Figure 103