High and Low Temperature & Low Pressure Chamber

Product No: LAP-100A

Leave a Message

Description

LAP-100A High and Low Temperature Low Pressure Chamber is mainly used in aviation, aerospace, information, electronics and other fields, to determine the instrumentation, electrical products, materials, parts, equipment in low pressure, high temperature, low temperature single or simultaneous action of the environmental adaptability and reliability test, and at the same time the test piece is energized for the measurement of electrical performance parameters.

LISUN Model		LAP-100*	LAP-250*	LAP-500*	LAP-010*	LAP-015*	LAP-020*
Working Room (cm)		415545	506075	708090	100100100	100100150	100100200
Working Power		5.5 (KW)	8.0 (KW)	9.0 (KW)	11.0 (KW)	17.0 (KW)	22.0 (KW)
Performance Index	Temperature Range	A: -20℃~150℃ B: -40℃~150℃ C: -60℃~150℃ D: -70℃~150℃
	Temperature Fluctuations	±0.5℃ (Normal Pressure, No-Load)
	Temperature Uniformity	±2℃ (Normal Pressure, No-Load)
	Temperature Deviation	±3℃ (Normal Pressure, No-Load)
	Heating Rate	1.0~3.0℃/ min (No-Load)
	Cooling Rate	0.7~1.0℃/ min (No-Load)
	Pressure Range	Normal Pressure~0.5kPa
	Pressure Deviation	Normal Pressure~40Kp: ±1.8Kpa; 40Kp～4Kpa: ±4.5％; 4Kp～0.5KPa: ±0.1Kpa
	Buck Time	≤60min (Normal Pressure～0.5kPa)
Control System	Controller	Imported Color LCD Touch Screen
	Accuracy Range	Accuracy of temperature: temperature 0.1℃, Indication Accuracy: temperature 0.1℃
	Temperature Sensor	Platinum Resistance PT100Ω/MV
	Pressure Sensor	Electronic Pressure Transmitter
	Heating System	Fully Independent System, Electrically Heated Nichrome Heater
	Cooling System	France “TECUMSEH” Fully Enclosed Air-cooled Single-stage / Refrigeration Compressor Cascade Mode
	Circulatory System	Temperature Resistance and Low-noise Air-conditioning Motors Multi-vane Centrifugal Wind Wheel
Materials of Chamber	Outside materials of Chamber	Quality Carbon Steel. Phosphate Electrostatic Spray Treatment / SUS304 Stainless Steel Matte Lines Hairline Treatment
	Inside materials of Chamber	SUS304 Quality Stainless Steel Mirror Light Board
	Insulation Material	Polyurethane Rigid Foam / Fine Glass Fiber Cotton
	Door Insulation	Double Resistant to High Temperature Aging Silicone Rubber Door Seal
Security Protection		Leakage, Short Circuit, Over Temperature, Motor Overheating, Over-Pressure Compressor, Overload, Over-Current Protection
Time setting Function		0.1~999.9 (H、M、S) Adjustable
Input Power		3Phase/5Wires, AC380V/50Hz (60Hz is option)
Ambient Temperature		5℃~＋30℃ ≤85％R.H

Ordering Note: The * in LAP-100* can choose four temperature ranges A/B/C/D. For example: LISUN model LAP-100B where B represents the temperature range of -40℃~150℃. Special working room sizes and temperature ranges can be customized according to customer’s requirements.

Standard:
IEC 60068-2-13 “Environmental testing – Part 2-13: Tests – Test M: Low air pressure”
IEC 60068-2-40 “Basic environmental testing procedures – Part 2-40: Tests – Test Z/AM: Combined cold/low air pressure tests”
IEC 60068-2-41 “Basic environmental testing procedures – Part 2-41: Tests – Test Z/BM: Combined dry heat/low air pressure tests”
ASTM D 6653 “Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method”
ISO 2873 “Packaging Complete, filled transport packages and unit loads Low pressure test”
GB10590 “Specifications for high and low temperature/low air pressure testing chambers”
GB15091 “low temperature low pressure test chamber requirements”
GB11159 “Specification for low air pressure test chambers”
GB/T2423. 25-1992 “Basic environmental testing procedures for electric and electronic products – Test Z/AM: combined cold / low air pressure tests”
GJB150. 2-86 “Environmental test methods for military equipments”

Tags：High and Low Temperature & Low Pressure Chamber , LAP-100 , LAP-100A