Features of waterproof test chamber and reasons for no water

Waterproof test chamber can also be called rain test box, waterproof test machine, waterproof test device, etc. It tests various waterproof grades of products by simulating the natural rain environment.
The main purpose of the waterproof test chamber is to detect the product, and judge whether the product performance meets the requirements through the verification after the test, so as to facilitate the design, improvement, verification and delivery inspection of the product.

There are 9 types of waterproof test chambers: ipx12 drip box , ipx34 swing pipe water spray test equipment , ipx56 waterproof jet test device, ipx7/8  immersion tank waterproof test device, ipx9 high temperature pressure jet waterproof test chamber.
The customized rain test includes IPX36 intelligent sprinkler and customized spray room. Vehicle rain test room. Automobile rain line, IPX5 outdoor cabinet spray room, IPX56 container shower room, patrol inspection robot rain test and other customized sprays. Of course, all waterproof equipment can be customized according to the test requirements of users.
They can meet the requirements of IEC60529:1989+A1:1999+A2:2013 Degrees of Protection Provided by Enclosures (IP Code), GB4208-2017 Degrees of Protection by Enclosures (IP Code) and other standards.
There are many reasons why the waterproof test chamber does not give water, such as air in the water pump and no water in the water tank. It is recommended to check whether the water tank of the equipment is full of water before use, or test whether the instrument operates normally.

Features of waterproof test chamber:
1. Thewaterproof test chamber is suitable for testing products with 1-9 protection levels.
2. The shell is made of domestic steel plate, and the inner box, turntable and wading part are made of SUS304 # stainless steel plate, which is durable.
3. The box type instrument has its own water tank for circulating water, so there is no need to build a professional waterproof test room.
4. The water tank has high and low water level alarm monitoring to effectively prevent the water pump from drying out and then being damaged.
5. The water pressure of the waterproof experimental equipment is adjusted according to the flow, and there is no specified number.

What are the details of daily maintenance of waterproof test chamber?
1. When the waterproof test chamber is running, it makes an abnormal noise. Please stop the machine for inspection. It can be used normally only after the fault is solved, so as to avoid future equipment failures that affect the service life of the equipment;
2. Clean the water circuit after each experiment. It is recommended to drain the water in the water tank and clean the water tank at least once a week
3. After the test, the equipment working room shall be cleaned and wiped with a soft cloth, and the box door shall be closed after natural air drying;
4. The bearing capacity of the standard turntable is ≤ 50kg. Do not overload.
5. According to the date of the calibration certificate, the local third-party organization shall be found in time for calibration; Once a year.
6. Try to put it in a ventilated environment to avoid the impact of humid climate on the chassis.

LISUN lauched JL-XC series waterproof test chambers are mainly used for small electronic and electrical products such as lamps, electrical cabinets, electrical components and so one. It is used for physical and other related properties checking under simulated climatic conditions. It determines whether the performance of the product meets the requirements or not after the test. It is very useful in the design, improvement, verification and factory inspection of the product. The JL-XC waterproof testing fully meets IEC60598-1,  IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, GB4208-2008 and GB7000.1.

JL-XC waterproof test chamber

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997