IPX56 waterproof test chamber

IPX56 waterproof test chamber is mainly used to assess and determine whether the enclosures and seals of electrical and electronic products, various electrical appliances and various lighting fixtures can ensure the good working performance of equipment and components after or during the water test. In addition, the waterproof test chamber can fully simulate the external rain environment and fully reproduce the impact of the external rain environment on the product.

The IPX56 waterproof test chamber is a box-type structure, which is divided into a circular tube type water spray test device and an automatic rectangular water spray test device. The most obvious difference between the two is that the rectangular test box can test higher and larger samples than the long cylindrical water spray test box. The size of the test chamber can be customized according to the customer’s requirements, which is more conducive to the accurate test of the sample grade.

The box structure test machine is sprayed with blue and white paint on the shell, which makes the appearance of the equipment more clean and generous. The outer box is made of stainless steel, and the inner box is basically made of SUS304 stainless steel, which is more resistant to corrosion and rust than ordinary steel plate. The movable pulley is installed at the bottom of the test instrument, and the equipment can move freely, which is convenient for operators to carry and install.

There are two sizes of spray guns, one is a hose with a diameter of 6.3mm; The other is a hose with a diameter of 12.5mm. (Designed and completed in strict accordance with the national GB4208 standard) The material is made of SUS304 stainless steel, which is corrosion resistant and beautiful. The spray angle of the spray gun can swing up and down, so that the accuracy of the equipment can be increased during the waterproof test. Of course, the swing amplitude and duration of the spray gun can be controlled through the operation panel.

IPX5 waterproof test method:
The model is a round tube IPX56 waterproof jet test device waterproof test chamber, and the box is equipped with grade 5 and 6 spray guns. The diameter of IPX5 grade water spray nozzle is 6.3mm. Now let’s popularize the simple operation skills of IPX5 strong water spray test box.
1. Before the test, check the water volume in the water storage tank of the testing machine to see if it is sufficient for the test. During the test, the water temperature is normal temperature; The water flow of IPX5 waterproof test is (12.5 ± 0.625) L/min;
2. The testing machine shall be placed on the flat ground, and the movable casters at the four corners of the bottom of the testing machine shall be fixed to prevent the displacement of the testing machine during the testing process; Plug in the electrical plug at the end of the testing machine and start the testing machine;
3. Open the inner box door and place the sample on the turntable; Bind and fix the sample on the turntable with a tie to prevent the sample from shifting during the test and causing incorrect test values;
4. According to the national standard, the water spraying time per square meter of the surface of the test object should be about 1min; The distance from nozzle to sample shall be 2.5m-3m;
5. On the operation panel, press the button of the red switch to start the IPX5 water spray test device; Click the IPX5 water spray test procedure on the operation panel. According to the national standard, the simulation test shall be conducted for at least 3 minutes;
6. After the test, the system alarm shall be released, and then the door of the box shall be opened, the sample shall be taken out, and the water drops on the sample shall be wiped dry with a rag, and the sample shall be taken to the test department to check whether there is water ingress and other problems.

IPX6 waterproof test method:
The model is a round tube IPX56 waterproof jet test device waterproof test chamber, and the box is equipped with grade 5 and 6 spray guns. The diameter of IPX6 grade water spray nozzle is 12.5mm. Now let’s popularize the simple operation skills of IPX6 waterproof jet test device.
1. Before the test, check the water volume in the water storage tank of the testing machine to see if it is sufficient for the test. During the test, the water temperature is normal temperature; The water flow of IPX6 waterproof test is (100 ± 5) L/min;
2. The testing machine shall be placed on the flat ground, and the movable casters at the four corners of the bottom of the testing machine shall be fixed to prevent the displacement of the testing machine during the testing process; Plug in the electrical plug at the end of the testing machine and start the testing machine;
3. Open the inner box door and place the sample on the turntable; Bind and fix the sample on the turntable with a tie to prevent the sample from shifting during the test and causing incorrect test values;
4. According to the national standard, the water spraying time per square meter of the surface of the test object should be about 1min; The distance from nozzle to sample shall be 2.5m-3m;
5. On the operation panel, press the button of the red switch to start the IPX6 water spray test device; Click the IPX5 water spray test procedure on the operation panel. According to the national standard, the simulation test shall be conducted for at least 3 minutes;
6. After the test, the system alarm shall be released, and then the door of the box shall be opened, the sample shall be taken out, and the water drops on the sample shall be wiped dry with a rag, and the sample shall be taken to the test department to check whether there is water ingress and other problems.

LISUN lauched JL-XC series waterproof test chambers are mainly used for small electronic and electrical products such as lamps, electrical cabinets, electrical components and so one. It is used for physical and other related properties checking under simulated climatic conditions. It determines whether the performance of the product meets the requirements or not after the test. It is very useful in the design, improvement, verification and factory inspection of the product. The JL-XC waterproof testing fully meets IEC60598-1,  IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, GB4208-2008 and GB7000.1.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997

Tags：JL-XC