IEC 60335-1:2020 is the general safety standard for household and similar electrical appliances, applicable to devices with rated voltages not exceeding 250V for single-phase and 480V for three-phase appliances. This standard establishes safety requirements and test methods covering electrical, mechanical, thermal, abnormal operation, and electromagnetic compatibility aspects to ensure product safety under normal and foreseeable misuse conditions. It is designed to be used in conjunction with specific IEC 60335 series standards, which provide additional requirements tailored to different appliance types.
Testing solutions based on IEC 60335-1:2020 involve key assessments such as temperature and humidity resistance tests, leakage current tests, dielectric strength tests, and abnormal operation tests. These tests are often conducted using automated testing equipment to enhance accuracy and efficiency. For instance, dielectric strength testing involves applying a specified high voltage to verify insulation integrity. Manufacturers and testing laboratories rely on IEC-compliant testing solutions to ensure products meet global safety regulations, facilitating compliance and market access.
Standard:
Part 1 | IEC 60335-1:2020 | Household and similar electrical appliances – Safety – Part 1: General requirements |
LISUN supplies the fully test solutions for the following IEC 60335-1:2020, please see the below excel table
IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements Standard Download
IEC 60335-1:2020 Clause and Subject | LISUN Model |
Clause 8.1.1IEC 61032 Standard Articulated Test Probe with 10N Thrust | SMT-02T10 |
Clause 8.1.2 Test Probe 13 with Cable with standard EN 61032 | SMT-1213C |
Clause 8.1.3 Test Probe 41 of IEC 61032 – Test Cone for Access Probes to Hazardous Hot or Glowing Parts | SMT-1241 |
Clause 11 Heating | TMPWS-010 |
Clause 12 Figure1/2/3/4 Leakage current and electric strength at operating temperature | MNTC-G2G3 |
Clause 14 Transient overvoltages Table6 | SUG335 |
Clause 15.1.1 IP Waterproof test | JL-12/ JL-34/ JL-56 /JL-7 |
Clause 16.2 Leakage current | WB2675D |
Clause 16.3 electric strength | WB2671B |
Clause 19.11.4.1 ESD Simulator Guns | ESD61000-2 |
Clause 19.11.4.3 EFT Immunity Measurement | EFT61000-4 |
Clause 19.11.4.4 Surge test | SG61000-5 |
Clause 19.11.4.5 RF Conducted Immunity Test System | RFCI61000-6-85W & AB-100W |
Clause 19.11.4.6 Voltage Dips and Interruptions Generator | CSS61000-11 |
Clause 19.11.4.7 Programmable AC/DC Testing Power Supply System | LSP-EMC500VA |
Clause 20.1 Stability | WDT-2 |
Clause 21.1 Mechanical strength | IK04 |
Clause 21.2 Figure7 Test Finger Nail for IEC 60335-1 Figure 7 | SMT-335F7 |
Clause 21.11 IEC 61032 Unjointed Test Finger Test Probe 11 | SMT-1211C |
Clause 21.18 Resistant to corrosion | YWX/Q-010 |
Clause 22.5 Peak Power Cutoff Device | LS-RVT-2000W |
Clause 23.3 and 25.14 Figure 8 Flexing test apparatus, | SW-6 |
Clause 29.2 Annex N Proof tracking test apparatus | TTC-1 |
Clause 29.3.3 High temperature test | GW-225 |
Clause 30.1 Annex O Figure O.1 Ball pressure test | ZBP-T |
Clause 30.2.1/2/3 Annex O Figure O.2 Glow wire test | ZRS-3H |
Clause 30.2.4 Annex E Needle flame test | ZY-3 |
Clause 31 Salt Spray test | YWX/Q-010 |
Annex B Automatic Double-Arms Drop Test Machine | DT-60KG |
Annex H 3 Position Plug Socket Switch Life Tester | CZKS-3 & DFX-40 |
Annex L Creepage Distance Ruler | CK-1 |
Your email address will not be published. Required fields are marked *