During World War II and after the war, Western countries, especially the United States, have established a series of environmental testing ground, laboratory and developed environmental testing standards. Required by the US military, all weapons equipment, parts, materials, and ammunition must be sent to the environment laboratory to simulate environmental testing, and then sent to environmental t...
LED blue light hazard is to evaluate the photochemical damage of the blue radiation to the retina. In practice, we may observe the light source or luminaire emitting surface in different regions from different angles. Therefore, in order to meet a variety of applications, IEC 62471 provides that the blue light hazard classification should be based on the radiation exposure values (weighted irradia...
IES LM-79-08 Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products. IES LM-79 standard is mainly for photoelectric performance measurement. Generally it is for whole lamp. Main measurement parameters as follow: Electrical Measurement: Voltage, Current, Power and Power Factor. Colorimetric Measurement: CCT, CRI and Chromaticity Coordinates Photometric Measurement...
Integrating Sphere is a hollow sphere which inner surface coated with white diffuse material. There are one or several apertures on the wall of the integrating sphere. The aperture is used as light well and receiving aperture for placing light-receiving device. The inner wall of integrating sphere should be good sphere. It usually requires that deviation from the ideal spherical should be less tha...
Spectroradiometer & Integrating Sphere System as main test device to measuring LED lamps, it’s as a most important device to judge the quality of lighting products. How to operating these device and make it have better work condition became the point, so the standard operating procedures of device is necessary. In the practice, the standard operating procedures have two parts: one is standar...
1. The allowable tolerance range of standard light source calibration and retest results is as follows: X, Y Chromaticity Coordinates: ±0.0008 Color Temperature: ±10K Luminous Flux: ±5‰ SLS-50W_Standard Lamp 2. The allowable tolerance range of contrast light source/ luminaires retest results as follows: X, Y Chromaticity Coordinates: ±0.0050 High Color Temperature: ±150K Low Color Temperatu...
The most critical factor that affects the quality of lighting is the luminous distribution performance of lamps. Using scientific testing methods and selecting the appropriate test instrument is the basis of obtaining accurate luminous distribution properties of luminaires. The test of luminaires’ luminous distribution is an important part of luminaire design and lighting design for quality con...
Xenon lamp aging test chamber adopts xenon arc lamp which can imitate the full spectrum sunlight to reappear destructive spectral wave in different environment. It can provide the corresponding environment simulation and accelerated test for scientific research, product development and quality control. It is also named “Sunlight Radiation Protection Test Device”. According to test standards an...
Definition: Means luminaries or light sources emit light intensity distribution in space. It can record the luminous flux of luminaries, light quantity, power, power factor, the size of the luminaries, luminaries efficiency including manufacturer of luminaries, type and other information. But the most critical is to record the light intensity distribution of luminaries in all directions. The gon...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語