Guidance and Comparison between 60950-1 and 62368-1

This Technical Report provides a mapping and comparison between the clauses of the traditional IEC 60950-1 and the corresponding clauses, requirements and test methods in the new IEC 62368-1 standard. The tables in this TR identify the corresponding requirements and test methods in IEC 62368-1 for each clause in IEC 60950-1; Notable differences between the standards are highlighted to help:
– those familiar with IEC 60950-1 to adopt the Hazard Based Safety principles in equipment design; and
– assess the potential impact of requirements in IEC 62368-1 on existing equipment which has been designed using IEC 60950-1.

1. Scope
This Technical Report provides a mapping and comparison between the clauses of the traditional IEC 60950-1 Second edition, 2005-12 and the corresponding clauses, requirements and test methods in the
new IEC 62368-1 Edition 1.0, 2010-01 standard.

2. References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies. IEC 60950-1 Second edition, 2005-12, Information technology equipment – Safety – Part 1: General requirements and Amendment
IEC 62368-1 Edition 1.0, 2010-01, Audio/video, information and communication technology equipment – Part 1: Safety requirements

3. Terms and definitions
For the purposes of this document, the following terms and definitions apply. See IEC 62368-1, Annex W, which identifies the relevant terms in IEC 62368-1 and, where different, compares them to the equivalent IEC/TC 642 basic safety publications and other relevant safety publications.

4. Notation
The left hand column lists the IEC 60950-1 clauses in order.
The right-hand column lists the corresponding clauses, requirements and test methods in IEC 62368-1. When a single clause in IEC 60950-1 is covered by several items in IEC-62386-1, this is indicated by a single cell on the left-hand side and multiple cells on the right-hand side. Conversely, when a single clause in IEC 62368-1 covers several items in IEC 60950-1, this is indicated by a single cell on the right hand side and multiple cells on the left-hand side.

LISUN SMT-S113 is used for testing access to document shredders. The Jointed Accessibility Wedge Probe is a high  precision probe made in exact accordance with UL and IEC standards such as IEC 62368-1 Figure V.4.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997

Tags：SMT-S113