+8618117273997weixin
English
中文简体 中文简体 en English ru Русский es Español pt Português tr Türkçe ar العربية de Deutsch pl Polski it Italiano fr Français ko 한국어 th ไทย vi Tiếng Việt ja 日本語
26 Feb, 2022 1786 Views Author: root

How dust test performed

In addition to producing a negative influence on the sensitive electronics that underlie the guidance and communications systems of today’s military vehicles, sand and dust may also have a negative impact on the tough exterior that serves to shield those components from harm. This test is performed in a dust test chamber or dust tester.

Sand and dust testing have become an essential element of the quality-control process for military contractors and other manufacturers across a wide variety of sectors for this reason alone.

How dust test performed?

In environmental sand and dust testing, a system is placed in a blowing chamber and exposed to sand or dust particles. In contrast, temperature, relative humidity, air velocity, particle composition, particle concentration, and system orientation are controlled.

When a system is exposed to sand and dust, the following problems may occur:
1. Getting through the seals
2. Deterioration of circuits
3. Obstacles and filters clogged with debris
4. Interference between mating components
5. Thermal conductivity is decreasing.
6. Optical properties are affected.
7. Transmission attenuation

Procedures of dust test

Procedure 1
Blown dust is the term used to describe the process of subjecting a system to moving dust particles over 12 hours, ideally from where the system would be anticipated to function.
If natural dust from the given location is not accessible, a test dust with a composition that is as near as possible to the natural dust may be used.

How dust test performed

                                   dustproof chamber

Ideally, you should maintain the temperature at typical ambient air temperatures and the system’s high working and storage temperatures initially defined.

It should not be more than 30 percent when it comes to relative humidity since caking of particles might develop in very humid situations.

You may utilize a variety of air velocities to depict the desired environment of the system. Because it is meant to be used in a real-world dust event, the system in issue must function well while being tested.
Once the testing is completed, the results are analyzed for damage and impairment. You will be amazed to know that LISUN also has the best dust test chambers.

Procedure 2
Blowing sand is the process of exposing a system to particles of quartz sand that are similar to those found in the location of interest for 90 minutes at a time.

Because there are 90 deserts on the planet, each having a unique sand particle size distribution, it is hard to define a distribution representative of every location. For this reason, the standard 150-850 micrometer particle size is employed throughout testing.

Ideally, you should maintain the temperature at typical ambient air temperatures and the high working and storage temperatures originally defined for the system.

Wind speeds of 18-29 m/s (40-65 mph) are recommended for simulating realistic wind and gusts and ensuring that the particles stay suspended throughout circulation and circulation of the air.

You should reorient the system at intervals of 90 minutes to ensure that it receives the most significant amount of erosion effects. If the technology in issue is planned to run during a real-world sand event, it is operated during testing.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are GoniophotometerIntegrating SphereSpectroradiometerSurge GeneratorESD Simulator GunsEMI ReceiverEMC Test EquipmentElectrical Safety TesterEnvironmental ChamberTemperature ChamberClimate ChamberThermal ChamberSalt Spray TestDust Test ChamberWaterproof TestRoHS Test (EDXRF)Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997

Tags:

Leave a Message

Your email address will not be published. Required fields are marked *

=