Standards: Fully meet CIE 177, CIE-13.3 , Optical-Engineering-49-3-033602, and IEEE. The Chroma Meter Specifications: • Spectral resolution: ±0.2nm, Reproducibility: ±0.5nm • Accuracy of chromaticity coordinate (Δx, Δy): ±0.005 • Correlated color temperature CCT: 1, 000K ~ 100, 000K (±0.6%) • Illuminance range: 5~200,000lx • LCD screen: 5inch high definition IPS capaciti...
IK ratings are defined as IKXX, where “XX“ is a number from 00 to 10 indicating the degrees of protection provided by enclosures (including luminaires) against external mechanical impacts. The different IK ratings relate to the ability of an enclosure to resist impact energy levels measured in joules (J). IEC62262 specifies how the enclosure must be mounted for testing, the atmospheric con...
1. The mechanism of EFT Immunity Measurement and its impact on electronic products The EFT immunity tester is a transient disturbance generated at the disconnection due to the insulation breakdown of the switch contact gap or the contact bounce when the inductive load (such as relay, contactor, etc.) is disconnected. When the inductive load is repeatedly switched on and off for many times, the pul...
The LS9955/LS9956 Automatic Safety Test System (electrical safety analyzer) combined the following function in one set: Withstand Voltage Test (AC/DC), Insulation Resistance Test (IR), Leakage Current Test (LLC), Grounding Resistance Test (GR) and Power Test. LS9955_Automatic Safety Test System The LS9955/LS9956 Automatic Safety Test System is according to GB4706.1, IEC/EN60335-1, UL60335, GB...
Standards: Fully meet CIE 177, CIE-13.3 , Optical-Engineering-49-3-033602, and IEEE. The Chroma Meter Specifications: • Spectral resolution: ±0.2nm, Reproducibility: ±0.5nm • Accuracy of chromaticity coordinate (Δx, Δy): ±0.005 • Correlated color temperature CCT: 1, 000K ~ 100, 000K (±0.6%) • Illuminance range: 5~200,000lx • LCD screen: 5inch high definition IPS capaciti...
LS9923 programmable withstand voltage & insulation tester use to do electricial products safety parameters measurement. it’s widely application at household appliances, electronic instrument, electronic equipment, electronic components and wires & cables industry, etc safety test. It fully meet the IEC60335-1, GB-16916.1, GB-4706.1, GB-7000.1, GB/T-24344, IEC60598-1 Standard. ...
What is the goniophotometer? The goniophotometer is the main measuring equipment for the light distribution performance test of lamps, which can be used to measure the spatial light intensity distribution, total light flux and lamp efficiency of lamps or light sources. The goniophotometer system consists of precision turntable and control system, spectrum analysis system, standard lamp, alignmen...
Origin and development of integrating sphere: The use of integrating sphere in measuring luminous flux can be traced back to 1890, and now it has become a widely used instrument in many aspects. The integrating sphere can be used to test the luminous flux, color temperature, light efficiency and other parameters of the light source. It is an indispensable instrument in the measurement of radiance,...
I、 Purpose of environmental test The environmental test examines the adaptability of the product to the environment, determines whether the environmental adaptability design of the product complies with the contract requirements, and provides decision-making basis for acceptance and rejection. A. Quantity of environmental stress used for environmental test In terms of environmental test, 19 te...