Integrating Spheres have a specified sensitivity to beam size and beam divergence. An integrating sphere is an optical instrument for capturing a light beam and measuring the power in the beam under specific conditions. It is also known as the Ulbricht Sphere and consists of a hollow spherical cavity. The inner surface is covered with a diffuse white reflective coating and the entrance and exit p...
1. About RoHS Directive The EU 2002/95/EC RoHS Directive “On the Prohibition of the Use of Certain Hazardous Substances in Electronic and Electrical Equipment” requires that since July 1, 2006, the sale of lead, mercury, pot, hexavalent Electronic and electrical equipment containing six hazardous substances: Ming, polybrominated diphenyl ether PBDE and polybrominated biphenyl PBB. The ...
LM-79 and LM-80 are energy efficiency standards approved by IESNA for LED product testing. LM-79 test refers to the photoelectric measurement of solid-state lighting products, mainly testing the luminous flux, light intensity, color degree, etc. LM-80 luminous flux maintenance rate (LED) life standard mainly tests the maintenance rate of luminous flux output, that is, the life test of LED light so...
After in-depth study on the three main forms of direct lightning strike, conducted lightning strike and induced lightning strike, people have established the theory of lightning induction and high-voltage counterattack, and defined the transmission law of high-voltage lightning wave on metal wire On this basis, gap series fuse arrester, gapless zinc oxide arrester and transient overvoltage surge s...
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test the CFL/LED which meets IES LM-80-08, electricity products, automative cars, home appications and mobiles. GDJS-015B High and Low Temperature Humidity Chamber ...
The EFT61000-4 EFT immunity tester is specially designed according to the characteristics and requirements of EFT measurement and it is an ideal disturbance source of EMS measurement. It has fine performance, such as high stability, high reliability, easy to use etc. It meets the standards requirements of IEC 61000-4-4, EN 61000-4-4, GB/T17215.301, GB/T17215.322 and GB/T17626.4. EFT61000-4 h...
ESD simulator guns (Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance with IEC 61000-4-2, EN61000-4-2, ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322. ESD61000-2_Electrostatic Discharge Simulator What is a ESD test? The static electricity generated by the human body to the object or between two objects may cause the electrical and electronic equipment ...
There are multiple methods for the evaluation of flammability and fire resistance of the material. They are usually direct flame and indirect flame methods. ”Direct Flame Method” applies a flame to a vertically or horizontally placed specimen under specific orientations. On the other hand, the ”Indirect Flame Method” uses a non-flaming heat source and then applies it to the...
Two types of photometry are used: spectrophotometer and goniophotometer. The optical characteristics detection of LED mainly includes: luminous intensity test, luminous flux test, spectral characteristics test (chromaticity coordinate correlated color temperature, color rendering index, dominant wavelength), spatial light intensity distribution test, and the influence of temperature effect on LED ...