Integral sphere measurement system is the most common light color measurement equipment in the luminaire industry, and its measurement results can meet the needs of most product development and testing, which is a relatively economical measurement method. The following is a brief introduction to the working principle of the integrating sphere measurement system and its measuring method of the inte...
LED lighting products are rapidly replacing traditional lighting products due to their superior luminous performance and high efficiency and energy saving. With people’s continuous pursuit of high efficiency and health, LED lighting products and technologies are constantly improving. The important basis for this is how to effectively and accurately measure LED actual performance, for which L...
Flicker Test System also known as stroboscopic still or tachometer, is an optical measuring device that can change a vibrating, high-speed rotating or periodically moving component into a “stationary” component. Flicker Test System itself can emit a short and frequent flash, and its flash speed can be set by the user according to needs. When the flash frequency of the stroboscope is ad...
ESD simulatorguns (Electrostatic Discharge Generator/Electrostatic Gun/ESD Guns) is in full compliance with IEC 61000-4-2, EN61000-4-2, ISO10605, GB/T17626.2, GB/T17215.301 and GB/T17215.322. ESD61000-2_Electrostatic Discharge Simulator In a dry environment, the human body generates static electricity on the object or the friction between two objects, so the charged human body will easily discharg...
What is type C goniophotometer definition? LSG-6000 Moving Detector Goniophotometer (Mirror Type C) was manufactured by LISUN completely meets LM-79-19, IES LM-80-08, COMMISSION DELEGATED REGULATION (EU) 2019/2015, CIE-121, CIE S025, SASO 2902, IS16106 and EN13032-1 clause 6.1.1.3 type 4 requirements. LSG-6000 is the latest upgraded product of LSG-5000 and LSG-3000 in compliance with the requireme...
The SG61000-5 fully automatic surge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator) . SG61000-5 Surge Generator How does a surge generator work? The SG61000-5 surge generator provides a common basis for evaluating the resistance of power cords and internal connectors of...
LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LED’s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE 177, CIE84, CIE-13.3, IES LM-79-19, Optical-Engineering-49-3-033602, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IESNA LM-63-2 and ANSI-C78...
EMI receiver system for EMI (Electromagnetic Interference) radiation conduction or conducted emissions testing. The EMI-9KB EMI receiver is produced by the full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for the EMI Test System, it solved the instrument self-EMI problem. The test results are according to the internationa...
IEC 62262 IK protection test means that electrical equipment housings are protected against external mechanical collisions, and the IK standard applies to rated voltages not exceeding 72. The 5 kV electrical equipment enclosure is only suitable for shells with special requirements for external mechanical collision protection classification a) The definition of the degree of protection that electri...