1 Scope This standard applies to flat non-rewirable two-pole plugs without earthing contact with a rated voltage of 250 Va.c. and a rated current of 2,5 A. They are supplied with a cord, for the connection of equipment of class lI, for household and similar purposes, and having no special protection against ingress of water are intended for indoor use. Plugs complying with this standard are suitab...
1 Scope This standard applies to flat non-rewirable two-pole plugs without earthing contact with a rated voltage of 250 Va.c. and a rated current of 2,5 A. They are supplied with a cord, for the connection of equipment of class lI, for household and similar purposes, and having no special protection against ingress of water are intended for indoor use. Plugs complying with this standard are suitab...
1 Scope This standard applies to fixed socket outlets for alternating current only, with a protective circuit, with a rated voltage of over 50 V but not more than 440 V, and with a rated current not exceeding 32 A, intended for domestic use or similar purposes, either in indoors or outdoors. GNGPL 1N_AL NOTE 1 When the term socket is used below, it means a fixed socket. The rated current is limite...
1 Scope This standard applies to fixed socket outlets for alternating current only, with a protective circuit, with a rated voltage of over 50 V but not more than 440 V, and with a rated current not exceeding 32 A, intended for domestic use or similar purposes, either in indoors or outdoors. GNGPL 6212_AL NOTE 1 When the term socket is used below, it means a fixed socket. The rated current is limi...
When we measure things like length, weight, or time, we can make mistakes that affect our results. These mistakes are called errors, and they happen when something goes wrong during the measuring process. Errors can be caused by things like the tools we use, the people reading the measurements, or the system we use to measure. For example, if a thermometer is broken and shows the wrong temperature...
In-Depth Analysis of Ball Pressure Test Apparatus and Standardization Guidelines of Ball Pressure Test Ball Pressure Test Procedure and Methods: • Sample Pressure Treatment: Place the sample under a pressure device, subjecting it to pressure for one hour to ensure testing in an unusually high-temperature environment. This step aims to simulate the behavior of the sample under specific conditions...
This specification applies to plugs and socket-outlets and to cable couplers, with and without earthing contact, with a rated voltage not exceeding 380 V and a rated current not exceeding 25 A, intended for domestic and similar general purposes, either indoors or outdoors. It also applies to mounting boxes for flush-type socket-outlets. GNGPL 57C7_AL This specification applies, as far as is reason...
This specification applies to plugs and socket-outlets and to cable couplers, with and without earthing contact, with a rated voltage not exceeding 380 V and a rated current not exceeding 25 A, intended for domestic and similar general purposes, either indoors or outdoors. It also applies to mounting boxes for flush-type socket-outlets. GNGPL 57C4_AL This specification applies, as far as is reason...
This specification applies to plugs and socket-outlets and to cable couplers, with and without earthing contact, with a rated voltage not exceeding 380 V and a rated current not exceeding 25 A, intended for domestic and similar general purposes, either indoors or outdoors. It also applies to mounting boxes for flush-type socket-outlets. GNGPL 57C3_AL This specification applies, as far as is reason...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語