In recent years, semiconductor lighting technology has developed rapidly, and subsequently semiconductor lighting lamps have also been greatly developed. This requires corresponding testing theory, testing technology, testing equipment, and testing standards to test and evaluate emerging new products. Vertical Goniophotometer is the core testing equipment of lighting fixtures. It is usually divide...
Application: The horizontal and vertical flame tester UL94 is mainly used to determine the combustion performance of plastic, rubber or film under a specified fire source to determine its fire resistance level. It is not only suitable for the research, production and quality inspection departments of electrical and electronic plastic or rubber products and their components such as lighting equip...
The static electricity generated by the human body to the object or between two objects may cause the electrical and electronic equipment circuits to malfunction or even be damaged. Therefore, tests that ESD test are widely used all over the world. The intelligent ESD test gun fully meets the standards IEC61000-4-2 and GB/T17626.2. The ESD test has direct discharge and indirect discharge methods. ...
There are several common goniophotometers for light distribution. The difference between them lies in the geometric shape of the measurement, that is, how to collect photometric data and how to mechanically realize the measurement. The types of Goniophotometers can be basically divided into Type A, Type B and Type C. For a detailed description, please refer to the 1987 edition of CIE 70. The diffe...
Generally speaking, the optical diffuser, when used carefully, can reduce the small errors caused by the uneven distribution of the incident light source on the detector or the deviation of the beam during measurement, so the accuracy of the integrating sphere measurements can be improved. However, in precise measurement, an integrating sphere must be used as an optical diffuser to minimize the ab...
The main purpose: The Glow Wire Tester/Glow Wire Test device is used to detect the thermal stress caused by heat sources or ignition sources such as glowing components or overload resistors in a short time to evaluate the standard level of related products. Standard: The ZRS-3H Glow wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T51...
The salt spray chamber mainly deals with the surface treatment of various materials, including paint, electroplating, inorganic and surface film, anodizing, anti-rust oil and other anti-corrosion treatments, and then testing the corrosion resistance of its products. Electroplating can be done according to customer requirements for the parts and products are subjected to salt spray test. 1. Prepare...
RoHS test is a mandatory standard established by EU legislation. Its full name is “Restriction of Hazardous Substances”, which was published on 1st July , 2006. It has been officially implemented. It is mainly used to standardize the material and process standards of electronic and electrical products to make it more conducive to human health and environmental protection. The purpose o...
The ESD test generator is mainly used to simulate the static electricity on the human body. The main function is to generate a certain amount of static electricity to see whether electronic related products can maintain normal operation under the action of static electricity. Then why do we do such a simulation esd test? Mainly because ESD test will cause certain harm to electronic components or p...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語