The walk-in environmental chamber is intended to determine the characteristics of your goods to deal with external conditions such as heat, cold, dryness, moisture, etc. The stroll in the room is also designed to monitor quality and help execute R&D work in various sectors. Walk-In Environmental Chamber is widely used in domestic defense, aerospace, automotive components, electronic and electr...
Optical radiation is measured using the integrating spheres, which is the most popular and frequently used instrument for this purpose. It is intended to produce a uniform distribution of optical radiation at the sphere’s inner surface via the use of numerous Lambertian reflections at the sphere’s inner surface. It is possible to utilize the integrating sphere to measure the radiant po...
An integrating sphere is one of the most important instruments in the measuring of light. An Ulbricht sphere is a device that catches all of the radiation emitted by a light source all at once. The essential features of a lamp when it comes to light measurement are those that manufacturers and end-users consider the most significant. The amount of lumens, the color, and the efficiency are the thre...
The goniophotometer is suitable for studying the angular spatial radiation properties of big LED modules, lighting goods, and traditional luminaires. Working with a photometer as a traditional goniophotometer or as a high-quality goniophotometer with a spectrometer is possible. This enables the highest accuracy to be assessed of all key performance features, such as luminous intensity distribution...
How to do ESD test? Here are a few simple steps: 1. Air discharge/contact discharge a) First turn on the switch power b) Then enter the selector switch, select air discharge or contact discharge c) When air discharge is selected, press the HV ON switch button (before pressing the switch, make sure that the OUTPUT ESD discharge gun is inserted into the socket, and the VOLTS ADJUST knob is turned fu...
Application: The horizontal and vertical needle flame tester UL94 is mainly used to determine the combustion performance of plastic, rubber or film under a specified fire source to determine its fire resistance level. It is not only suitable for the research, production and quality inspection departments of electrical and electronic plastic or rubber products and their components such as lighting ...
Introduction of glow-wire tester: The glow-wire tester uses simulation technology to evaluate the fire hazard caused by thermal stress caused by heat sources such as hot components or overload resistors in a short period of time. It is one of the series of electrical and electronic components fire hazard test instruments. It is suitable for evaluating the flammability test and light-off temperatur...
Application: The salt spray test machine is suitable for the surface treatment of various materials, including paint, electroplating, organic and inorganic film, anode treatment, anti-rust oil, etc. YWX/Q-010_Salt Spray Test Machine Salt spray test is an environmental test that mainly uses artificially simulated salt spray environmental conditions created by salt spray test equipment to assess th...
Environmental chamber is the general name of all test chambers that simulate natural climate environment. The representative products include salt spray test chamber, high and low temperature test chamber, constant temperature and humidity test chamber, ultraviolet aging test chamber, xenon lamp aging test chamber, ozone aging test chamber, oven, etc. . The high and low temperature humidity test c...