LISUN can provide very fine Photo Detectors. They are NIM traceable (directly compared with NIM standard head) and is validated to PTB of Germany. Photo Detector Problem of the part filtering technology: the tested light on the photo detector must be strictly uniform, otherwise even for a so called f1’=0.5% photo detector, its actual f1’ may exceed 10%. Full-filtering technology: in order to a...
At present, LED and LED lamps and lanterns can’t achieve ideal service life due to the reason of the performance of LED. The LED junction temperature in the working status is not only the direct key to its life and efficacy, but is also influenced by the thermal resistance under the same service conditions. The feasibility of the heat conduction system design of LED also directly affects the li...
When choosing the instrument to purchase or use for the application, it is very important to understand the types of instruments available for measuring color. A colorimeter or spectrophotometer can be used to measure any test substance that is itself colored or can be reacted to produce a color. Both colorimeter and spectrophotometer provide data obtained over the same range of visible wavele...
When you measure the photometric and chromaticity properties of optical system, it must be under the uniformly prescribed light source, the test result can be compared with each other. In order to unite the measurement standards, the International Commission on Illumination (CIE) provides the lighting body and standard illuminant. The definition of “illuminant” and “lighting body” by CIE s...
The U.S. Government issued her LED test standards IESNA-LM-79-08. This approved method is a guide developed for the measurement of Solid State Lighting (SSL) products such as LED Street Light, LED Flood Light, LED Down Light, LED Ceiling Light, LED Par Light, LED Tube, LED Module and so on. The most of LED fixtures manufactory use the Integrating Sphere to do the color and photo parameters ...
According to IEC60598 standards, the lighting fixtures must be passed the safety test on AC Voltage withstanding, Insulation resistance, Grounding resistance and Power/Function test. Lisun launch her Automatic Programmable Safety Tester LS9934 (including leakage current test, withstand voltage test, insulation resistance test, grounding resistance test and power test), the instrument is desig...
XRF Analyzers are a popular solution to test electronics and various product lines for RoHS test. Specification: Rapid development of global economy brings serious environmental issues, which is becoming the focus of all around the world. The RoHS directive EU announced on Feb 13th of 2003 became effective on Jul 1st of 2007 for the purpose of restricting the pollution caused by the dispose of ele...
1.LED In addition to the semiconductor lasers, when the current motivates the semiconductor diodes can emit the optical radiation. Strictly speaking, the term LED should be only applied to emit the visible Diode; The diode which can emit near-Infrared radiation is called infrared light emitting diode (IRED, Infrared Emitting Diode); The emission peak wavelength is limited near the shortwave, the d...
LPCE-2(including spectrophotometer, integrating sphere) is designed for analyzing the photometry, colorimetry and electricity of LED lamp, energy-saving lamp, fluorescent lamp, high-voltage sodium lamp, high-voltage mercury lamp, metal halide lamp and phosphor, completely meets the test requirements of CIE for photometry and colorimetry. Measure and display the relative spectral power distributio...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語