LED manufacturers must learn some basic luminaries’ parameters such as brightness, spectrum and color temperature and so on as standard to identify pros and cons. We will introduce following LED lighting products normal parameters and tell you how to design and improve LED lighting products. 1、Brightness/Luminance Brightness/luminance L: Luminance is the luminous flux per Unit solid angle per ...
As the basic test equipment to measure LED luminaries or other lighting product’s performance, the photometer & integrating sphere system has been used at lighting industry for many years. The first generation test instrument is photometer, then single-monochromator spectrocolorimeter, double- monochromator spectrocolorimeter and developed array CCD spectroradiometer in now days, the lightin...
IEC/EN 62471 is to assess relative optical radiation safety of different lamps and lamp system. It fully replaces IEC/EN60825 regarding the requirements of LED products energy level and adds the requirements of photobiological, including spectral irradiance and spectral radiance. According to the test data, it classify the hazard level of the products, including exemption level, low hazard level, ...
Due to the LED light source manufacturing technology development, widely application layer surface, so in order to ensuring the safety of consumers, UL established UL8750 for LED module and lighting lamps and lanterns and safety standards to regulate the LED lighting products. This standard is the industry sales LED products to North America essential safety norms, apply to the LED as the main sou...
LED power driver is one of the key parts of LED luminaries, the performance of the driver will greatly affect the product quality. The lower driver efficiency, the lower efficiency conversion ratio, this is not only influence the product quality, and also will bring the heat dissipation problem. The driver failure is the important factor to affect the LED life. Now the power driver is the reason c...
SSL (Solid State Lighting) product’s color quality is very important; people pay more and more attention to it. CRI already has 40 years history. CIR is a quantitative measure of the ability of a light source to reveal the colors of various objects faithfully in comparison with an ideal or natural light source, which is color fidelity degree. There are many problems when CRI is applied in LED at...
CE is a safety certified standard, and it is regarded as the passport to enter into European Market. From the date of Jan.2, 2013, all the electric and electronic equipments export to European Market must be marked with CE, and for the CE test, EMC is a very important part of it. EMC test includes EMI test, electrostatic immunity test, fast transient immunity test, voltage dips, short interrupt...
Different color temperature will give us a different feeling. In a different environment with the same brightness, the object’s color we can see will be a great difference. It is not difficult for us to find that there are different colors when we go to different places. There are also different color temperatures in different environment, which will also bring us a different mood. In commercial...
The ballast (resistor ballast) is a device for limiting the flow of sunlight and generating instantaneous high pressure. Following is some difference between the electronic ballast and inductance ballast. 1. Inductance Ballast is an iron core inductance coil, the inductance characteristic is when the current changes in the coil, the magnetic flux changes, resulting in the induction electromotive, ...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語