Introduction Numerous scientific, industrial, and commercial endeavors rely on precise light measurement. High precision spectroradiometer integrating sphere systems have been developed as potent instruments to address the requirement for accurate light characterization. The precise and consistent measurements made possible by these cutting-edge devices are invaluable to scientists, engineers, and...
Protection of Users-Accessibility of Uninsulated Live Parts and Moving Parts-and User Servicing The requirements in 8.2- 8.17 apply only to low voltage parts that are accessible to the user and are isolated from medium voltage circuits. See 8.18 for requirements for medium voltage parts and low voltage parts that are not isolated from medium voltage circuits. For protection of service personnel re...
Introduction The Glow Wire Test is a standard procedure for determining the combustibility of electrical insulation. It’s vital to the security and dependability of electrical and electronic devices. This article’s focus is on Glow Wire Testing as it relates to electrical insulating materials, and its objective is to offer a thorough knowledge of this technique. We’ll get into wh...
Introduction Because of the convenience, efficiency, and coziness that they bring into our homes, appliances have evolved into an absolutely necessary component. The proliferation of electronic devices in the house, on the other hand, raises the risk of electromagnetic interference (EMI), which may occur between various electronic components. Because to electromagnetic interference (EMI), the perf...
Household and similar electrical appliances –Test Finger Nail Safety 1 Scope IEC 60335-1 This International Standard deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be a source ...
Ozone aging test chamber is mainly used in rubber industry; According to the test method and standard, it can be divided into “static” and “dynamic”. Static generally refers to putting the test piece into the test chamber for test after being stretched, and dynamic means putting the sample on the fixture of the test chamber, and doing the test while stretching. The outer bo...
Introduction Testing for quality control and compliance are very important aspects of the manufacturing and verification of lighting. In order to ensure that the quality of these items is satisfactory, goniophotometers are used rather often. The usage of goniophotometers, which measure the spread of light in an objective way, enables manufacturers to assess the effectiveness, reliability, and comp...
BS-EN-61032, this International Standard specifies details and dimensions of test probes intended to verify theprotection provided by enclosures with regard to: – protection of persons against access to hazardous parts inside the enclosure; – protection of the equipment inside the enclosure against ingress of solid foreign objects. The object of this International Standard is: – ...
The IEC 60598 test standard provides specific requirements for luminaires. A luminaire is defined as an electric light source for operation from supply voltages up to 1,000 volts. IEC 60598-1 speaks to many tests for luminaires. This document covers only the ingress protection section of the standard. For information about the who standard, please visit our IEC 60598-1 Testing page. A luminaire is...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語