Ozone Aging Test Chamber can be used for rubber products, such as vulcanized rubber, thermoplastic rubber, cable insulation sheath and other products under static tensile deformation, exposed to airtight and lightless air with constant ozone concentration and a constant temperature test chamber, to test the sample according to the predetermined time, and to evaluate the ozone aging resistance of r...
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for single LED and LED luminaires’ photometric, colorimetric and electrical measurement. The measured data meets the requirements of CIE 177, CIE84, CIE-13.3, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IES LM-79-19, Optical-Engineering-49-3-033602, IESNA LM-63-2, ANSI-C78.377 and ...
Salt spray testing machine is a kind of testing device used to simulate corrosive environment containing salt gas, to evaluate the anti-corrosion performance of different materials, components and electronic components. It adopts advanced control technology, which can automatically control parameters such as temperature, humidity and salt fog concentration, and start and stop the test, and is easy...
The Rapid temperature change test chamber is applicable to the detection of various performance indicators of aerospace products, information electronics, instruments and meters, materials, electricians, electronic products and various electronic components under the condition of rapid temperature change. Rapid temperature chamge test chamber: It is mainly used to conduct environmental simulation ...
I. Surge Test Equipment Standard The national standard for surge voltage tester is GB/T17626.5 (equivalent to the International Standard IEC61000-4-5). The standard mainly simulates various cases due to indirect lightning strikes, such as: (1) lightning strikes on external wires, resulting in a large current flowing into the external wires or ground resistance, thus generating interference voltage...
High and low temperature humidity test chamber is a scientific experiment equipment for simulating various environmental conditions. It can simulate temperature and humidity conditions in real environment, helping people to verify products with high performance, safety and durability. GDJS-015B Temperature Humidity Chamber | Thermal Chamber The control system is the heart of the whole equipment, w...
Introduction As we move towards a more sustainable future, lighting designers are more concerned with developing ecologically friendly and low-energy lighting options. Sustainable lighting design relies heavily on goniophotometry, a precise measuring method for assessing the angular distribution of light. Focusing on its effect on energy efficiency, light pollution reduction, and human-centered li...
We know that CIE (International Commission on Illumination) is the most authoritative organization in the colorimeter industry. Basically, the chromaticity space and color difference calculation formula used by Colorimeter are all launched by CIE. The CIE Lab, CIE RGB, and CIE XYZ that we are currently familiar with are all color difference instrument spaces launched and continuously improved by C...
I. Definition of Glow Wire Test The Glow Wire Tester is used to test the stability of electronic appliances when working. The hot thread itself is actually a fixed-specification resistance wire loop. During the test, the hot thread needs to be heated to a predetermined temperature by electricity, so that the top of the hot thread can be contacted with the sample to meet the standard requirements, ...
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語