Introduction: The reliability of electronic components and systems against ESD occurrences is largely determined by the results of ESD testing. During testing, electrostatic discharge (ESD) guns are often employed to simulate regulated ESD pulses. However, it might be difficult to establish which ESD gun type is the best match for your testing needs due to the market’s abundance of such prod...
Introduction Due to the fact that the durability and reliability of electronic devices are directly proportional to their level of water resistance, IP waterproof testing equipment is an absolute need. Even though there is general familiarity with the IP waterproof testing ideas, recent technical improvements have resulted in a number of additional capabilities that are more advanced. In this arti...
In recent years, LED-based portable spectrophotometers have seen a rise in popularity as a result of the several benefits they provide in comparison to conventional spectrophotometers. In this post, we are going to talk about the benefits and drawbacks of portable spectrophotometry that is based on LEDs. Advantages of LED-Based Portable Spectrophotometry Portability: The most major advantage offer...
The UV chamber is also knowm as the UV aging chamber is mainly used to simulate the destructive effects of sunlight, humidity, and temperature on materials. The ultraviolet aging chamber simulates sunlight, condensation, and natural humidity. The sample is tested in a simulated environment for a few days or weeks, which can reproduce the damage that may occur outdoors for several months or years....
The needle flame test equipment is suitable for testing the flame retardant performance of electronic components, electrical components, mechanical components, injection molded parts, and other electrical products. This machine simulates the small flames generated inside the product under fault conditions, and evaluates the fire hazard using simulation technology. Experimental principle of needle ...
Dustproof testing machine can also be called sand and dustproof test chamber, sand and dust test chamber and other names. It uses the medium talcum powder to conduct dust detection on the shell of the product. It refers to the dustproof test on the shells of various electronic and electrical products, which can also be understood as the IP dustproof grade test. Working principle requirements: The ...
I.The principle of high and low temperature test chamber alternating wet and heat test box: Under high and low temperature test chamber, due to the steam added is not fully mixed with air or contact with the box wall and local condensation, not only the added steam amount decreases, but also releases heat to make the temperature of the humid air inside the box rise: In addition to the above e R...
Introduction With their sophisticated features and intuitive interfaces, digital oscilloscopes have completely transformed the world of electronic measurement. There are many benefits to using these instruments over their analog predecessors, but there are also some drawbacks to keep in mind. The benefits and drawbacks of digital oscilloscopes will be discussed in this article. In order to choose ...
Introduction Integrating spheres have shown their worth in several sectors by allowing for precise and trustworthy data collection during optical measurement and light characterisation. Significant advances in performance, adaptability, and measurement accuracy have resulted from recent developments in integrating sphere design and technology. This article delves into the cutting-edge developments...