The Benefits of Using a Waterproof Test System for Product Development

The Waterproof Test System is mainly used for waterproof testing or sealing testing of complete electronic products or components. Using compressed air for testing is a non-destructive testing method that will not cause secondary damage to the product.

The product can be subjected to tests such as water spraying, water immersion, etc. to simulate various humid and flood environments and verify whether the waterproof performance of the product meets the specified standards.

The Waterproof Test System can help manufacturers identify waterproof performance issues of products, adjust production processes and materials in a timely manner, improve the waterproof performance of products, and thereby improve product quality and competitiveness.

By using this device, timely detection of waterproof performance issues during product design and production can avoid the additional costs of maintenance and upkeep caused by waterproof issues.

What are the advantages of a Waterproof Test System?
1. Waterproof Test System for testing products
Usually used to prevent water ingress, leakage, oil leakage, and air leakage. The airtight and waterproof tester uses air, and the water molecules in air are smaller than those in liquids such as water and oil. Therefore, as long as the gas leakage rate is within a certain range, the sealing performance of the product can be determined with higher accuracy and leakage detection can be achieved. This is an advantage that short-term bubble water detection does not have. To achieve the purpose of airtightness testing,

2. The Waterproof Test System uses compressed air as the medium
Due to the lack of viscosity of compressed air, it will not cause secondary pollution like the water detection method. Only one air compressor is needed to achieve non-destructive waterproof testing and airtightness testing.

3. The core component of the Waterproof Test System is the sensor
No human eye observation is required, and the level of internal control is integrated. Compared with traditional waterproof detection methods, the speed is significantly improved.

What are the characteristics of a Waterproof Test System?
1. Able to complete testing without damage
A highly rated waterproof detector will complete initial testing in a non-destructive state, and more importantly, there is no need to prepare samples in advance. This way, regardless of the usage scenario, the waterproof detector can be tested in a step-by-step manner. Once it is confirmed that there are no abnormalities in the detector, it can immediately enter the next production process, and the entire process is completed in one go.

2. The entire test took a relatively short time
The volume presented by the waterproof detector is not large, and regardless of the type of object being faced, the detector can complete the testing task in a short time without delaying the next stage of evaluation work. This part of the content can be regarded as the highlight of the testing instrument. Prior to this, many testing instruments and methods were time-consuming and labor-intensive, which deviated from consumer requirements.

3. The standards upheld are trustworthy
The standards upheld by waterproof detectors belong to the category of * in the industry, which means that as long as we ensure the quality of the purchased detectors is excellent, the obtained test results are universal in the field, and we bid farewell to the tedious process of multiple tests. This is also seen as a major feature of the detector, which has become an important reason for many customers to choose it, after all, the production task is heavy and cannot consume too much energy in other links.

JL-X waterproof test machine is according to IEC60529:1989 +A1:1999 +A2：2013 《Degrees of protection provided by enclosures(IP Code)》, IEC60598, IEC60335 and IEC 60034-5, GB/T-2423.2, GB4208, GB7000.1. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products such as electrical & electronic products, LED luminaires as well as in the relevant quality control department for the waterproof detection of the enclosures protection grades.

waterproof test JL-X

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator Guns, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618117273997