What is climate chambers?

Climate chambers are enclosed spaces used to evaluate the impact of certain environmental conditions on biological things, industrial goods, materials, and electrical devices and components. Environmental chambers may also be called environmental chambers.

An environmental test chamber simulates real-world circumstances to which equipment, materials, devices, or components may be subjected. It’s also utilized to speed up the effects of environmental exposure, which may happen under unexpected circumstances.

There are applications for climate chambers:

1. For the sole purpose of evaluating the impact of the environment on test specimens
2. The process of preparing test specimens for subsequent physical or chemical assessments
3. In terms of specimen testing circumstances, the surrounding environment

Depending on the size, environmental chambers may hold anywhere from 20 litres to more than 400,000 litres. They may be as large as a room or as tiny as a unit that can be mounted on a universal testing machine or another testing device.

What does it need to operate a climatic test chamber?
Products are tested in a controlled environment by using a climate test chamber to expose them to different environmental conditions. Chamber testing includes things like Climatic Chamber and Thermal Shock testing. To mimic climate or excessive exposure for a product or a substance in a laboratory-controlled environment, the Climatic Chamber uses several methods. Thermal shock testing simulates how materials would respond when subjected to sudden changes in severe climatic conditions, such as moving from freezing to boiling in a matter of seconds.

Extreme temperatures, sudden and extreme temperature variations, altitude, moisture or relative humidity, electrodynamic vibrations, electromagnetic radiation, and more are all conditions that products may be exposed to in a climatic chamber.

The environmental chamber is used to test the dependability of manufactured samples, specimens, or components, as well as to monitor any aftereffects such as corrosion. Many chambers are pre-programmed with certain parameters. It is possible to program others such that they go through a predetermined series of events.

Researchers spray a salt solution via a nozzle within the chamber to create a fine mist that covers the whole product to mimic the corrosive impact of the sea, for example. Evaporating water over a heat source or using ultrasonic technology may mimic humidity in the test chamber.

High and Low Temperature Humidity Chamber

What are the applications of a climatic test chamber?
An environmental chamber’s primary purpose is to examine how everyday goods perform under severe climate conditions. In the following scenarios, climate chambers may be utilized for the following purposes:

1. Thermal and humidity testing of textiles and construction materials as well as polymers, composites, adhesives, metals, and electronic components to see how they are affected.
2. Stockpiling of construction material testing results
3. Fungus spore incubation on plants in a humid environment

LISUN climatic chambers: an introduction
LISUN’s climatic test chambers are designed to satisfy a wide variety of requirements, including drying, aging acceleration, stability testing, and burn-in. Using a temperature and percent HR set point, as well as the actual temperature and percent HR, can all of our environmental chambers be shown concurrently. The chambers produce cold, heat, and humidity, and they also include an air drier. They are equipped with all of these things.

Lisun Instruments Limited was found by LISUN GROUP in 2003. LISUN quality system has been strictly certified by ISO9001:2015. As a CIE Membership, LISUN products are designed based on CIE, IEC and other international or national standards. All products passed CE certificate and authenticated by the third party lab.

Our main products are Goniophotometer, Integrating Sphere, Spectroradiometer, Surge Generator, ESD Simulator, EMI Receiver, EMC Test Equipment, Electrical Safety Tester, Environmental Chamber, Temperature Chamber, Climate Chamber, Thermal Chamber, Salt Spray Test, Dust Test Chamber, Waterproof Test, RoHS Test (EDXRF), Glow Wire Test and Needle Flame Test.

Please feel free to contact us if you need any support.
Tech Dep: Service@Lisungroup.com, Cell/WhatsApp:+8615317907381
Sales Dep: Sales@Lisungroup.com, Cell/WhatsApp:+8618917996096