Plug and Switch Testing Devices

LISUN design all kinds of test instruments for plug, socket, switch and power cord. Plug socket and switch life tester, power cord bending tester, wire damage tester, pull out tester, temperature rise tester, etc.

DWC-1 IEC 60884-1 Clause 24.5 Figure 30, IEC 61386-1, IEC 60811-1-4 Low-Temperature Impact Test Device

LS-GWC-1 IEC 61386-1 Clause 12 Figure 8 Heat Resistance Test Device for Cable Conduit

GNGPL-3610-2PA IEC 60884-1 Clause 30.1 Figure 41 | IEC 60811-3-1 Clause 8 | High Temperature Pressure Test Device

LS-TCT-1 IEC60884-1:2022 Figure 41 Thermal Compression Test Device for Plug Socket

SBLL-3P20A IEC 60669-1 Clause 19.3 Test for Switches Intended for Self-ballasted Loads

DFX-20 IEC 60669-1 Clause 19.1 and 19.2 Externally Ballasted Fluorescent Lamp Test Load Cabinet

DFX-WD20A IEC 60669-1 Clause 18.3 Tungsten/Halogen Lamp Load Cabinet

CZKS-6 IEC 60669-1 Clause 18 and 19 | IEC 61058-1 Cluase 17 Six Positions Plug Socket Switch Life Tester

CZKS-3 IEC 60884-1 Clause 20 and 21 Three Positions Plug Socket Switch Life Tester

Product Categories

Standards

IEC 60227-1:2007 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part 1: General requirements

IEC 60245-1:2008 Rubber insulated cables – Rated voltages up to and including 450/750 V – Part 1: General requirements

IEC 62612:2018 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V – Performance requirements

IEC 62560: 2011 Self-ballasted LED-lamps for general lighting services by voltage > 50 V – Safety specifications

IEC 60998-1:2002 Connecting devices for low-voltage circuits for household and similar purposes-Part 1:General requirements

Applications

LEDs and Luminaire Test Solutions

Mobile and Network Test Solutions

Automotive Electronics Test Solutions

LM-79 and LM-80 Test Solutions