IEC 60810 Lamps, light sources and led packages for road vehicles-Performance requirements

This document is applicable to filament lamps, discharge lamps, LED light sources and LED packages to be used in road vehicles, i.e. in headlamps, fog-lamps, signalling lamps and interior lighting. It is especially applicable to those lamps and light sources which are listed in IEC 60809.

It specifies requirements and test methods for the measurement of performance charac-teristics such as lamp life, luminous flux maintenance, torsion strength, glass bulb strength and resistance to vibration and shock. Moreover, information on temperature limits, maximum lamp outlines and maximum tolerable voltage surges is given as guidance for lighting and electrical equipment design.

For some of the requirements given in this document, reference is made to data given in tables. For lamps not listed in such tables, the relevant data are supplied by the lamp manufacturer or responsible vendor.

The performance requirements are additional to the basic requirements specified in IEC 60809. They are, however, not intended to be used by authorities for legal type-approval purposes.

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)applies.

IEC 60050-845, International Electrotechnical Vocabulary – Part 845: Lighting

IEC 60061-1, Lamp caps and holders together with gauges for the control of interchangeability and safety -Part 1: Lamp caps

IEC 60068-2-14, Environmental testing – Part 2-14: Tests – Test N: Change of temperature

IEC 60068-2-43, Environmental testing – Part 2-43: Tests – Test Kd: Hydrogen sulphide test for contacts and connections

IEC 60068-2-58, Environmental testing – Part 2-58: Tests – Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices(SMD)

IEC 60810:2017 Clause and Subject	LISUN Model
Clause 3.1-3.6 and 5 Luminous Flux Maintenance	LEDLM-84PL
Clause 4.2 Torsion Strength	CH338
Clause 4.4 Lamps Life Test	SY2036
Clause 4.6 Resistance to Vibration	LVD-100KG
Clause 7 Test Conditions for LED Light Sources	LPCE-2
Clause 7.6 Powered Thermal Cycling Test	GDJS-015B
Clause 8.6.19 DEW Test
Clause 7.12-7.13 Transient Voltage Test	SUG335
Clause 7.14 Electrostatic Discharge Test (ESD)	ESD61000-2
Clause 8.6.3 High Temperature Operating Life(HTOL) Test	GW-500
Clause 8.6.7-8.6.8 Electrostatic discharge,(ESD-HBM)&(ESD-MM) Test	ESD-883D
Clause 8.6.16 Thermal Shock (TMSK) Test	HLST-500D
Clause 8.6.20 Gas Corrosion Test	SQ-010

Tags：CH338 , ESD-883D , ESD61000-2 , GDJS-015B , GW-500 , HLST-500D , LEDLM-84PL , LPCE-2 , LVD-100KG , SQ-010 , SUG335 , SY2036