IEC 62612:2018 Self-ballasted LED lamps for general lighting services with supply voltages > 50 V – Performance requirements

The IEC 62612:2018 standard specifies performance requirements for self-ballasted LED lamps intended for general lighting services, operating at supply voltages greater than 50 V. It covers lamps with integrated control gear that emit light in a single direction or omni-directionally. The standard defines parameters such as luminous flux, luminous efficacy, color characteristics (including color rendering index and chromaticity), lumen maintenance, and lifetime. It also includes requirements for compatibility with existing light sources and electrical systems to ensure proper operation in general lighting applications.

Additionally, IEC 62612:2018 outlines testing methods to verify compliance with these performance requirements. It prescribes procedures for measuring initial and maintained performance over the lamp’s lifetime, as well as testing for safety and durability under specified environmental conditions. This standard aims to ensure consistent quality, energy efficiency, and reliability for LED lamps, supporting their use as replacements for traditional lighting technologies in residential, commercial, and industrial settings.

LISUN supplies the fully test solutions for the following IEC 62612:2018, please see the below excel table:

IEC 62612:2018 Clause and Subject	LISUN Model
3.1 rated voltage	LS2050B
3.3 lumen maintenance (for lamp) Lumen flux maintenance	LEDLM-84PL
10. Lumen Maintenance(table 5, figure 1)	LEDLM-84PL
3.6 life(of an individual LED lamp)	CH316
3.11 aging	SY2036
9.1 Luminous flux	LPCE-2(LMS-9000)
Annex A.3 Electric and photometric parameter	LPCE-2(LMS-9000)
9.2 Luminous intensity distribution, beam angle	LSG-1890B
Annex A.3.4 Luminous intensity distribution	LSG-1890B
10. Colour variation and rendering	LMS-6000
10.2 Colour rendering index
Annex A.3.7 Color rendering & Annex A. 3.8 Chromaticity test
11.3 Endurance test	GDJS-015B
11.3.2 Temperature cycling test	GDJS-015B
Annex C measurement of displacement factor(figure C.1 & figure C.2)	LS2050B