Product No: SW-6
The SW-6 Power Cord Flexibility Bending Tester is according to IEC 60884-1: 2022 Clause 23.4 and Figure 28 (GB/T 2099.1-2021 Clause 23.4), IEC 60745-1: 2008 Clause 24.12 and Figure 9 (GB 3883.1-2014 Clause 24.12) and IEC 60335-1-2023 Clause 25.14 and Figure 8 (GB 4706.1-2024 Clause 25.14). It used to test the bending resistance of household appliance power cords at the part where they enter the appliance, and verify their reliability.
Test principle: Use a motor to drive the turntable to rotate, apply a load to the cord and pass the rated voltage, so that the sample can bend left and right at a certain speed and angle, and automatically stop when the number of times is reached or the cord breaks and there is no signal.
Specifications:
| LISUN Model | SW-1 | SW-2 | SW-6 |
| Test Station | Single station | Two stations | Six stations |
| Electrical Control Method | PLC intelligent integrated control, 7-inch human-machine touch interface operation | ||
| Driving Method | Servo Motor Drive | ||
| Sample Clamping Method | Mechanical clamping, adjustable clamping point position | ||
| Bending Angle | 0-360° Adjustable (preset to ±30°, ±45°, ±60°, ±90°) | ||
| Bending Rate | 0-60times/min (Variable frequency speed regulation) | ||
| Bending Times | 0~999999 can be preset, default is 25 times | ||
| Load Weight | 1 set of weights；5N，10N，20N | 2 set of weights：5N，10N，20N | 6 set of weights：5N，10N，20N |
| Load Power Supply | Load voltage 0-250V adjustable, current display; customizable load voltage and current adjustable styles | ||
| Test Judgment | Judge based on the signal given by whether the current is conducting | ||
IEC 60884-1: 2022 Clause 23.4 And Figure 28
IEC 60745-1: 2006 Clause 24.12
IEC 60745-1: 2006 Figure 9
IEC 60335-1: 2020 Clause 25.14
IEC 60335-1: 2020 Figure 8
中文简体
English
Русский
Español
Português
Türkçe
العربية
Deutsch
Polski
Italiano
Français
한국어
ไทย
Tiếng Việt
日本語
